Typical Deployment; Figure 1 - Typical Ptp 300 Series Bridge Deployment - Motorola PTP 300 Series User Manual

2.2

Typical Deployment

The PTP 300 Series Bridge consists of an identical pair of units deployed one at each end of
the link. The radio link operates on a single frequency channel in each direction using Time
Division Duplex (TDD). One unit is deployed as a master and the other as a slave. The
master unit takes responsibility for controlling the link in both directions.
The PTP 300 Series Bridge is aimed at a wide range of applications. An example application
is an enterprise that has a requirement to connect together the Local Area Network (LAN) of
two or more buildings as shown in Figure 1.
Each end of the link consists of:
•
Outdoor Unit (ODU): An integrated (or connectorized -see section 10 "Connectorized
PTP 300 Series Bridge") outdoor transceiver unit containing all the radio and networking
electronics.
•
PIDU Plus: An indoor connection box containing a mains power supply, status indicators
and network connection port.
A pair of units is normally supplied pre-configured as a link.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 1 - Typical PTP 300 Series Bridge Deployment

13
2 Product Description