Range Adjustment Curves; Figure 120 - Ptp 300 Range Adjustment For Data Rates, Curve A - Motorola PTP 300 Series User Manual

12.4 Range Adjustment Curves

Use these graphs to look up the link Range and find the Throughput Factor that must be
applied to adjust the 0 km data throughput rates for the required combination of Link Mode
Optimization (IP or TDM) and Link Range (km).
Curve A (Figure 120) is used when one of the following conditions applies:
•
Link Symmetry = 3:1
•
Link Symmetry = 1:1 and Link Optimization = IP
•
Link Symmetry = 1:3
Curve B (Figure 121) is used only when Link Symmetry = 1:1 and Link Optimization = TDM.
Figure 120 – PTP 300 Range Adjustment for Data Rates, Curve A
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
197
12 Data Rate Calculations