Erase Configuration; Figure 98 - Reboot Confirmation Pop Up; Figure 99 - Confirm Erase Configuration Pop Up - Motorola PTP 300 Series User Manual

8 Recovery Mode
The user will now be presented with a pop up box asking them to confirm the action (Figure
98).

Figure 98 - Reboot Confirmation Pop Up

The unit will now reboot. The unit should now start up in normal mode but with the IP address
set to 169.254.1.1 and the Ethernet interface set to auto-negotiate and auto-MDI/MDIX.
Should the unit fail to start up the user should refer to Section 9 " (Fault Finding".
8.4

Erase Configuration

To erase the unit's configuration the user should press the "Erase Configuration" button on
the "Recovery Options" page (Figure 92). The user will now be presented with a pop up box
asking them to confirm the action (Figure 99).

Figure 99 - Confirm Erase Configuration Pop Up

158
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299