Unit Setting 2 - JVC LST0728-001C Instructions Manual

Jvc network video recorder instruction manual
Table of Contents

Advertisement

Applications
Main Menu List (continued)

Unit Setting 2

A
B
Item
A
HDD meter
Display at startup
B
Clock setting
Display at startup
Display at date
Display at second
C
SNMP setting
Enable of SNMP
Enable of TRAP
SNMP manager's
address
Community name
Confirmation interval
of alarm
Confirmation interval
of CPU usage
Confirmation interval
of D-drive
Confirmation interval
of NVR Viewer
Confirmation interval
of camera
Copy extension MIB onto the flash memory
D
OK/Cancel
72
Preset Values
Select check box
● Do not select check box
Select check box
● Do not select check box
Select check box
● Do not select check box
Select check box
● Do not select check box
Select check box
● Do not select check box
Select check box
● Do not select check box
^
^
10 seconds
10 seconds
60 seconds
10 seconds
60 seconds
^
Description
Select this check box to display the HDD meter when the
system starts up.
● For details on HDD meter, refer to [HDD Meter] (A Page 133).
Select this check box to display the clock when the system
starts up.
Select this check box to display the date on the clock.
Select this check box to display the seconds on the clock.
Select this check box to enable the SNMP function.
Select this check box to enable the TRAP function.
Specify the IP address of the SNMP manager. (IP address)
Specify the SNMP community name. (1 to 32 characters.
Alphanumeric characters only.)
Specify the interval to monitor the alarm.
(10 to 9999 seconds)
Specify the interval to monitor CPU usage.
(10 to 9999 seconds)
Specify the interval to monitor the writing rate to the D drive.
(30 to 9999 seconds)
Specify the interval to monitor the startup status of NVR viewer.
(10 to 9999 seconds)
Specify the interval to monitor connection status of the camera.
(60 to 9999 seconds)
Copy the MIB extension information into a flash memory device.
● For details on SNMP settings, refer to [Setting SNMP]
(A Page 134).
OK: Exits after entries and the selected content are configured
to the system.
Cancel: Exits without saving all entries and selected settings.
C
D
Reference
Page
A Page 133
A Page 152
A Page 152
A Page 152
A Page 134
A Page 134
A Page 134
A Page 134
A Page 152
A Page 152
A Page 152
A Page 152
A Page 152
A Page 134
^

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-n1600uVr-n1600eVr-n900u

Table of Contents