Table of Contents
Advertisement
Basic Operation
Viewing Live Images via
Mouse Control
This section describes the procedures for viewing live images by
controlling the mouse.
Displaying the [Live] Screen
1
Select [Live] from the main menu
● The NVR Viewer starts up and the [Live] screen appears.
● When the [Browse] or [Screen Setup] screen of the NVR
Viewer is displayed, click the [Live] tab.
● To exit the NVR Viewer, click the [ ] button.
[Live] Tab
View List
[Views] Section
[Live] Screen
● If you have specified the camera record settings without closing
the [Live] screen, live images may not appear immediately after
you have exited the camera settings.
In this case, AUnable to connect to the server! Reconnecting to
the serverB or AUnable to connect to 127.0.0.1:80 on the device
name(camera name)! Reconnecting to the serverB will appear
on the [Live] screen. (127.0.0.1:80 is the internal IP address of
this unit that is currently in operation.)
Memo :
● Depending on the condition of the network circuit, it may take
some time before images from the camera are displayed.
● Depending on the connection of the additional hard disk, several
minutes may be required for the [Live] screen to appear.
36
Select a View
For details on the view settings, refer to [Screen Setup]
(A Page 60).
1
Select a view from the [Views] section, or from
the view list at the upper end of the window
Note :
● Do not switch the view frequently within a short time interval.
● When live images do not appear on VN-C625U/VN-C655U, set
the password for connecting VN-C625U/VN-C655U on the
camera unit as well as this unit again. For details on the setting
procedures, refer to the [INSTRUCRTIONS] of the camera in
use and procedures for setting the root password on the [Edit
device settings] screen in this manual (A Page 87).
● The audio setting is restored to ANo Audio SourcesB when you
return from the setting screen to [Live]. Set the audio parameters
again.
[ ] Button
Select a Camera
1
Select a camera by clicking on the bar at the
upper end of the screen of the camera to select
using the mouse
● When you have selected a camera, the blue bar at the top
of each live image changes to a lighter blue tone.
[Outputs...] Section
[Event] Section
[Live] Screen
[PTZ Control] Section
[Audio] Section
A
B
C
D
Advertisement
Table of Contents
