Smdr Output Options - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Recording)
output options for each of the eight SMDR ports. Refer to the following chart for a description of each
option, its range and default setting.
35
Input Data
Item No.
01
02
03
04
05
06
07
08
09
10
11
2-344
Program 35 : SMDR Account Code Setup
SMDR Port Number
Item
Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
PBX Calls
When the system is behind a PBX, SMDR can
include all calls (1) or just calls dialed using the
PBX trunk access code (0).
Trunk Number or Name
Select whether the system should display the
trunk name (0) or the number (1) on SMDR re-
ports.
If this option is set to 1, Program 35-
02-14 must be set to 0.
Summary (Daily)
Set this option to (1) to have the SMDR report
provides a daily summary (at midnight every
night).
Summary (Weekly)
Set this option to (1) to have the SMDR report
provides a weekly summary (every Saturday at
midnight).
Summary (Monthly)
Set this option to (1) to have the SMDR report
provides a monthly summary (at midnight on the
last day of the month).
Toll Charge Cost
Set this option to (1) have the SMDR report in-
clude toll charges.
Incoming Call
Enable this option (1) to have the SMDR report
include incoming calls. If you disable this option
(0), incoming calls do not print.
Extension Number or Name
Set this option (1) to have the SMDR report in-
clude extension numbers. Set this option (0) to
have the SMDR report include extension names.
All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication
should be displayed.
Walking Toll Restriction Table Number

35-02 : SMDR Output Options

1 ~ 2
Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Output
1 = Output
Program 35 : SMDR Account Code Setup
ISSUE 1.0
Default
1
1
1
1
1
1
1
1
1
0
1