Class Of Service Options (Incoming Call Service) - NEC SL1000 Programming Manual

ISSUE 1.0

20-09 : Class of Service Options (Incoming Call Service)

Level
IN
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call
feature availability for each extension Class of Service (COS).
Input Data
Class of Service Number
Item
Item
No.
01 Second Call for DID/DISA/
DIL/E&M Override
Turns off or on the extension
ability to receive a second
call from a DID, DISA, DIL,
or tie line caller.
With this option set
to 1, the destination
extension must be
busy for a second
DNIS caller to ring
through. If the desti-
nation extension
does not have a
trunk key available
for the second call
and a previous call
is ringing the exten-
sion but has not yet
been answered, the
second caller hears
busy regardless of
this program setting.
02 Caller ID Display
Turns off or on the Caller ID
display at an extension.
03 Sub Address Identification
Defines whether or not an
extension displays the Caller
Sub-Address.
04 Notification for Incoming
Call List Existence
Determines whether or not
an extension display shows
Check List when an incom-
ing call is missed by a user.
05 Signal/Voice Call
Turn off or on an extension
ability to enable Handsfree
Answerback or Forced Inter-
com Ringing for their incom-
ing Intercom calls.
06 Incoming Time Display
Programming Manual
Program 20 : System Option Setup
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
01 ~ 15
Default
Related Pro-
gram
COS 01 ~ 15
0
1
0
1
11-11-15
1
11-11-16
1 (SL1000)
0 (SL1100)
SL1000/SL1100
Program
20
Note
2-169