Program 92 : Copy Program; Copy Program - NEC SL1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-01 : Copy Program to copy the data for one program to another multiline terminal,
port, group, or other number. Refer to the following charts to see which programs can be copied.
Input Data
Program Number
Item No.
Source Number
Enter the extension, trunk, group or other number from which the
data is to be copied.
Destination Number (From)
Enter the first extension, trunk, group or other number to which
the information is to be copied.
01
Destination Number (To)
Enter the last extension, trunk, group or other number to which
the information is to be copied. If the information is being copied
only to one extension, trunk, group or other number, enter the
information entered in the Destination Number (From) entry.
The Copy Program is applicable only for the following programs :
Trunk Port Base
Program No.
14-01 Trunk Basic Data Setup
14-02 Analog Trunk Data Setup
14-04 Behind PBX Setup
14-08 Music on Hold Source for Trunks
14-09 Conversation Recording Destination for Trunk
20-30 Timer Class for Trunk
21-03 Trunk Group Routing for Trunks
21-12 ISDN Calling Party Number Setup for Trunk
21-21 Toll Restriction for Trunks
21-22 CO Message Waiting Indication
22-02 Incoming Service Type Setup
22-03 Trunk Ring Tone Setup
22-05 IRG Assignment for Normal Ring Trunk
Programming Manual

Program 92 : Copy Program

Item
Program Name
SL1000/SL1100

92-01 : Copy Program

XX ~ XX
Input Data
• For Trunk Base : Trunk Port Number
001 ~ 126 (SL1000) 001 ~ 096
(SL1100)
• For Trunk Group Base : Trunk
Group Number 01 ~ 25
• For Extension Base : Extension
Number Maximum four digits
(SL1000) Maximum eight digits
(SL1100)
• For Department Group Base : De-
partment Group Number 01 ~ 32
• For DSS : DSS Console Number 01
~ 12
• For Door Phone: Door phone num-
ber : 1 ~ 8 (SL1000) 1 ~ 6 (SL1100)
Note
Copy all data except Trunk Name (Item 01).
Program
92
2-577