JVC 0199MNV*UN*SW Instructions Manual page 38

38
HOW TO MAKE CONNECTIONS WITH A COMPUTER
By connecting the printer to your computer and using the provided image transfer software, you
can manipulate images more easily and process/print them with higher picture quality.
Preparation
Install the provided image transfer software in your computer.
Connect the printer to the computer.
PRESS INPUT SELECT TO SELECT
1
PC MODE
•The PC lamp lights up.
•If you select PC MODE when a source
unit is connected to the printer's VIDEO
INPUT connector, the picture input from
the VIDEO INPUT connector appears
on the screen.
TRANSMIT VIDEO DATA IN THE
2
COMPUTER TO THE PRINTER
•For details, refer to the instruction
manual of the provided image transfer
software.
•While video data are being transmitted:
the PC lamp blinks.
•While video data are being converted:
the PRINT lamp blinks.
CONVENIENT FUNCTIONS (cont.)
Windows PC connection
cable (D-sub 9-pin for
PC/AT-compatibility)
To RS-232C connector
Macintosh connection cable
To the modem or
printer port
TV
(Set the input select switch
to VIDEO)
To PC connector
To PC connector
Printer
WHEN THE PRINT LAMP STAYS
3
LIT, PRESS PRINT TO START
PRINTING
You can also save images on the
computer that are stored in the printer
and ready for printing by clicking on the
Save All button in the Album window of
the provided image transfer software.
It is recommended to transmit video data
to the computer before printing; if you
transmit video data to the computer after
you finish printing, the picture quality
may be changed.
To video input connector
Rear panel
connectors
PC VIDEO OUT
To video output
connector