JVC 0199MNV*UN*SW Instructions Manual page 31

TITLE IMPOSE
Seven different titles including Congratulations! are
stored in the printer and can be called up for
superimposed printing. Colors and positions of the
titles are set in advance.
Preparation
See page 12.
Press INPUT SELECT to select the appropriate input mode
depending on the connection to the source unit (
•If IrDA (INFRARED) or PC MODE is selected, you do not have to perform steps 1 and 2 . Refer to page
20 or 38 to send the image you want to print to the printer.
BEGIN SOURCE PLAYBACK
1
1
PRESS MEMORY WHEN THE
2
DESIRED IMAGE APPEARS
•If the image is unstable, press
MEMORY again.
PRESS OK
2
PRESS MENU
3
PRESS CURSOR
4
TITLE, THEN
PRESS OK
If you want to print a different image...
Follow the instructions below to erase the title before printing.
1 Perform steps 3 – 6 described above, selecting the blank frame in the upper left corner
of the screen in step 5 .
2
Press SOURCE/STORED IMAGE to switch back to the input display.
The title is now erased.
You can use frame impose (
imposing first, then title imposing.
TO SELECT
MENU 2
EFFECT
TITLE
FRAME
QUALITY :
STD HIGH
PICTURE MEMORY
TO MENU 1 [ ]
ITEM [ / ]
OK [OK]
SELECT [ / ]
QUIT [MENU]
page 32) and title impose at the same time. Perform frame
page 18).
PRESS CURSOR
5
THE
DESIRED
TITLE
PRESS OK
6
•The image appears on screen with the
selected title superimposed on it.
2/2 •If you want to cancel and try again,
press MENU.
PRESS OK
7
PRESS PRINT TO START
8
PRINTING
31
TO SELECT
SEL [ / ]
OK [OK]
QUIT
[MENU]