JVC 0199MNV*UN*SW Instructions Manual page 36

36
PICTURE MEMORY FUNCTION — To Store An Image In Memory
You can store up to 8 of your favorite images in the
printer's memory. Even if you turn the power off,
these images will remain in memory.
Preparation
See page 12.
Press INPUT SELECT to select the appropriate input
mode depending on the connection to the source unit
( page 18).
•If IrDA (INFRARED) or PC MODE is selected, you do
not have to perform steps 1 and 2 . Refer to page 20 or
38 to send the image you want to print to the printer.
BEGIN SOURCE PLAYBACK
1
1
PRESS MEMORY WHEN THE
2
DESIRED IMAGE APPEARS
•If the image is unstable, press MEMORY
again.
2
PRESS OK
PRESS MENU
3
PRESS CURSOR
4
PICTURE MEMORY, THEN PRESS OK
PRESS CURSOR
5
IMAGE YOU WANT TO REPLACE
•The selected image will be replaced with the
new one.
•If you press MENU before pressing OK, you will
exit the PICTURE MEMORY screen.
NOTE: The replaced image cannot be restored
once you press OK.
CONVENIENT FUNCTIONS (cont.)
TO SELECT
TO SELECT THE
MENU 2
EFFECT
TITLE
FRAME
QUALITY :
STD
PICTURE MEMORY
TO MENU 1 [ ]
ITEM [ / ]
SELECT [ / ] QUIT [MENU]
PICTURE MEMORY
PICTURE 1 PICTURE 2
PICTURE 3 PICTURE 4
PICTURE 5 PICTURE 6
PICTURE 7 PICTURE 8
PLEASE SELECT
MEMORY NUMBER
SELECT [ / ] QUIT [MENU]
2/2
HIGH
OK [OK]
OK [OK]