Nokia 810 User Manual page 39

Voice command list
The voice command list includes the phone functions listed for
voice commands. Each function on the list can be checked and
edited using the options below:
p
Play voice commands
This option will play back the voice command as recorded.
p
Change
You can record a new voice command for a selected entry,
replacing the existing one.
p
Delete voice command?
Select this option to erase a voice command and make room
in the memory for a voice command.
From the standby display:
a
Select the Voice menu and scroll with
comms. item. Press to select it.
a
Scroll with to List of voice commands
to select it.
a
Scroll with to the desired option in the
commands and press
a
You can choose any one of the above options for the entry
selected.
a
Follow the instructions shown on the display.
to the Voice
and press
List of voice
to select it.
Before using voice commands, note that:
p
Voice commands are not language dependent. They are
dependent on the speaker's voice.
p
Voice commands are sensitive to background noise. Record
them and make calls in a quiet environment.
p
When recording a voice command, speak clearly into the
microphone.
p
Very short commands are not accepted. Use long commands
and avoid similar commands for different functions.
Executing a voice command
x
When an application using the GPRS connection is sending
or receiving data, you cannot execute a voice command. To
do so, you must first end the application using the GPRS
connection.
To execute a voice command:
a
Press . A tone will sound and the message
appear on the display.
a
Say the voice command loudly and clearly.
Your car phone will play back the voice command and
automatically perform the function assigned to it 1.5 seconds
later.
Settings
Speak now will
39