Nokia 810 User Manual page 15

Press the Navi TM wheel
to access a function in a particular context:
– to start the menu and select an item.
– to select an item from a list.
– to start options and select an item.
This key activates the following functions from the standby
display:
a
Press to switch off loudspeaker .
An incoming call is indicated by a flashing display.
a
Press and hold to put the phone in off mode.
a
Press to switch incoming or ongoing calls from your car
phone over to a compatible, paired headset and back as
desired.
This key activates the following voice functions from the
standby display:
a
Press to activate voice dialling and voice commands.
a
Press and hold to activate recording (also during ongoing
calls).
Alphanumeric keypad
Use these keys to enter numbers 0-9, letters, and other
characters. Several characters have been assigned to each key.
To enter a character, repeatedly press the related key until you
have reached the desired character.
Entering numbers and characters:
a
To enter a number, press and hold the number key for
approximately one second.
a
To call up characters, repeatedly
a
To enter a blank space, press
a
To switch between upper- and lower-case characters, press
.
a
Use the Navi TM wheel
text.
For example, if you wish to enter the letter "C", press
times. When the flashing cursor appears to the right of the
letter entered, you can select the next character to be entered.
Repeat these steps until you have completed your entry.
x
The procedure set out above applies only for entering text.
Caution!
When you have finished using the handset, make sure that it is
placed securely in the cradle. A loose handset may cause bodily
injury if you have to brake sharply or should have an accident.
Basic components of the handset
.
.
to move the cursor in the entered
three
15