Testing The Connection To Sunny Portal; Setting The Upload Frequency - SMA SUNNY WEBBOX with Bluetooth User Manual

SMA America, LLC
7.2.4 Testing the Connection to Sunny Portal
You can test the connection to Sunny Portal. You do not need to register in Sunny Portal to do this.
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu
or
Select "Settings" on the toolbar.
2. Select the "Sunny Portal > Status and Actions" parameter group.
3. Select [Edit].
4. In the "Portal connection test" field select "Execute".
5. Select [Save].
☑ The Sunny WebBox performs a connection test. The connection test was successful if "Ok" is
displayed in the "Result of the last portal connection test" field, and "--------" is again displayed in
the "Portal connection test" field.
– If the connection test is unsuccessful, refer to section 9.1 "General Troubleshooting for the
Sunny WebBox" (page 75).
7.2.5 Setting the Upload Frequency
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
or
Select "Settings" on the toolbar.
2. Select the "Sunny Portal > Basic settings" parameter group.
3. Select [Edit].
4. In the "Upload frequency" field select the desired value. See Table:
Selection
"every 15 minutes"
"daily"
"hourly"
Possible Delays in Data Uploads
The uploading of data can be delayed by up to 2.5 minutes, in order to avoid too great a
data transmission load for the Sunny Portal at certain times.
If an upload is still in progress and a request is made for a new upload, (possibly at
15 minute intervals), then the new upload will not performed. The data will be transmitted
at the next upload.
5. Select [Save].
☑ The Sunny WebBox will transmit the data to the Sunny Portal at the prescribed intervals.
User Manual
Meaning
Data transmission within the next full 15 minutes.
Data transmission within the next full 24 hours.
Data transmission within the next full hour.
Managing Plant Data
SWebBox20-eng-BUS111312 55