SMA SUNNY WEBBOX Quick Reference Manual For Commissioning

Device for Plant Monitoring
Sunny WeBBOX with BLUETOOTH
quick Reference Guide for commissioning
SWebbox20-SE-US-CA_en-12 | Version 1.2
infORmatiOn On thiS DOcument
Validity
This quick reference guide for commissioning is valid for the Sunny WebBox with Bluetooth
from hardware version A1 and from firmware version 1.04.
Safety
intended use
The Sunny WebBox with Bluetooth is a communication device that records, logs and makes
available the data of a PV plant via a user interface using the integrated web server.
The Sunny WebBox is designed for indoor use only.
Only operate the Sunny WebBox using the plug-in power supply included in the scope of
delivery and within the voltage range intended for this.
The Sunny WebBox is only to be used with original accessories or recommended accessories
approved by SMA America, LLC.
Only use the Sunny WebBox for the purposes described in this manual.
For safety reasons, it is forbidden to modify the product or install components that are not
explicitly recommended or distributed by SMA America, LLC for this product.
The enclosed documentation is an integral part of this product.
• Read and observe the documentation.
• Keep the documentation in a convenient place for future reference.
Safety Precautions
All electrical installations must be made in accordance with the local and
National Electrical Code ANSI/NFPA70 or the Canadian Electrical Code
®
To reduce the risk of personal injury and to ensure the safe installation and operation of the
product, you must carefully read and follow all instructions, cautions and warnings in the
CD-ROM manual attached to the product before installing or using the product.
Danger to life due to electric shock
Lethal voltages are present inside the device and inside the plug-in power supply.
• Do not open the device or the plug-in power supply.
• Only use the device indoors and in a dry environment; keep it away from liquids.
Risk of injury due to incorrect cable routing
Incorrectly laid cables may cause injuries due to tripping hazard.
• Install the cables in such a way that no one can stand on or trip over it.
WiReLeSS technOLOGy
®
CA
CSA C22.1.
®

SyStem RequiRementS

Operating system:
• Microsoft Windows 7
• Microsoft Windows Vista
• Microsoft Windows XP SP2
• Linux with kernel from version 2.6.12*
(KDE)
• Mac OS X from version 10.6*
* with Sun Java Runtime Environment (JRE) from version 6
a
PRePaRatiOn
This quick reference guide will guide you through the commissioning stages of your
Sunny WebBox with Bluetooth with the help of the Sunny WebBox Assistant.
Make sure that all SMA Bluetooth devices of your PV plant have been set and
commissioned under the same NetID. Your installer will inform you which NetID is
applicable.
Identify the ideal installation/mounting location for the Sunny WebBox with Bluetooth using
the Sunny Explorer software or the Sunny Beam with Bluetooth. Observe the information on
the installation/mounting location indicated in the installation manual of the Sunny WebBox
with Bluetooth.
B
unPackinG
For commissioning, you will need the following items from the packaging:
Sunny WebBox with Bluetooth
Plug-in power supply with travel adapter
Blue patch cable (Ethernet crossover cable)
US
Red patch cable
c
cOmmiSSiOninG the Sunny WeBBOX
1. Set the NetID of your PV plant in the Sunny WebBox.
2. Connect the Sunny WebBox and a node (e.g., router, network switch, hub) using the
red patch cable (recommended).
or
Use the blue patch cable to connect the Sunny WebBox directly to a computer.
3. Connect the plug-in power supply to the Sunny WebBox and plug into a socket-outlet.
☑ The Sunny WebBox starts up and is ready for operation once the "SYSTEM"
and "POWER" LEDs are glowing green. The start-up sequence can take up to
90 seconds.
☒ If the "SYSTEM" or "POWER" LEDs are not glowing green, see Section
"Troubleshooting".
Recommended screen resolution:
• 1,024 pixel x 768 pixel
internet browser:
• Internet Explorer from version 8
• Firefox from version 3.6
Wireless Technology
®