Connecting The Video Components For The Source Of Video 3 - JVC AX-THL1 Instructions Manual

Connections

Connecting the video components for the source of VIDEO 3

7 To connect the video components for the source of VIDEO 3
• You can get better picture quality in the order — S-video > Composite video.
Center unit
NOTE
• Unify the way of TV connection and that of video component's (for example, connect a video component through S-VIDEO jack
when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV.
• When playback from USB source, scan mode can be adjusted to have better picture quality. (See page 18.)
• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound
output through this system may be distorted.
• When shipped from the factory, the source of "VIDEO 3" have been set for use with the VIDEO 3 AUDIO L/R audio terminal
for the audio connection. If you connect the components with digital optical audio cord, change the audio input (VIDEO 3)
setting to "Digital." (See page 31.)
12
Do not connect the power cord until all other connections have been made.
5
Align the marks.
Composite video cord
RCA pin plug
cord
(not supplied)
To analog audio output
Digital optical audio cord
(not supplied)
S-video cord (not supplied)
or
(supplied)
To composite To S-video
video output output
game console or
camcorder
To digital optical audio
output