Speaker Layout - JVC AX-THL1 Instructions Manual

Digital media system
Hide thumbs Also See for AX-THL1:
Table of Contents

Advertisement

Connections

Speaker layout

To obtain the best possible sound from this system, you need to place all the speakers except the subwoofer at the same
distance from the listening position.
Surround left
If your speakers cannot be placed at the same distance from the listening position
You can adjust the delay time of the speakers. See "Delay menu (DELAY)" on page 30.
NOTE
• Place the satellite speakers on a flat and level surface.
• The subwoofer, front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed
properly, they may cause color distortions. So, pay attention to the following when installing the speakers.
– When placing the speakers near a TV set, turn off the TV's main power switch or unplug it before installing the speakers. Then
wait at least 30 minutes before turning on the TV's main power switch again.
Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.
• The surround speakers are not magnetically shielded.
If they are located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the
speakers nearby the TV or monitor.
8
Do not connect the power cord until all other connections have been made.
Center speaker
Front left
speaker
speaker
Front right
speaker
Subwoofer
Surround right
speaker

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp-thl1cSp-thl1fSp-thl1sSp-thl1wTh-l1

Table of Contents