Correcting Minor Faults - Miele G 7859 Operating Instructions Manual

Correcting minor faults

With the aid of the following explanatory
notes, minor faults can be corrected
without contacting the Miele Service
Dept.
Any work on the electrical components
of the machine should only be carried
out by a suitably qualified and
competent person in accordance with
local and national safety regulations.
Unauthorized repairs could be
dangerous.
Faults / possible causes
The machine does not start
– the door is not properly closed
– the plug is not properly inserted
– the fuse is defective / has blown
A few minutes after switching on, the
p / 6 indicator light flashes (fault
code F..E appears in the display)
– the valves are closed
– the filters in the water inlet hose are
dirty
– water pressure is too low.
^ Turn the program selector to the f
"STOP" position (the fault code goes
out).
^ Switch the machine off (press I-0).
^ Open the valves or clean the filters
(see "Cleaning and care").
^ Switch on the machine again and
re-select the program.
42
The wash cycle finishes too early
and the p / 6 indicator light flashes
(fault code F A appears in the
display)
– the drain hose is kinked
– the drain pump is blocked
^ Turn the program selector to the f
"STOP" position (the fault code goes
out).
^ Correct the fault.
^ Pump away the water and start the
program again (see additional
program "DRAIN" and "Switching
on").