Miele G 7859 Operating Instructions Manual page 34

Programming special functions
5. Altering the wash temperature
and/or the temperature holding time
in the "Main wash" and "Final rinse"
program stages
In the event of a service call-out,
assist the service technician by
making a note of any change to the
wash temperature and / or the
temperature holding time in the
"Program chart".
Factory settings for the main wash
temperature and temperature holding
times and for the final rinse
temperature and its holding time are
given in the program chart.
The main wash and final rinse
temperatures can be set from 30°C -
70°C and the temperature holding time
from 1 to 10 minutes.
^ Turn the program selector to the f
"STOP" position (the programming
level is displayed only in this switch
position).
^ Switch off the machine.
^ Press 4 and 6 at the same time,
hold them in and while doing so
switch the machine on with the I-0
button.
The current program status "P..."
appears in the display.
The p / 6 indicator light comes on.
34
"Main wash" temperature:
^ Press 3 three times, "E03"
(programming level 3) appears in the
display.
^ Turn the program selector to the
program which needs to be
changed. The actual value appears
in the display after °C.
^ Press 4 or hold it in, until the
required value appears in the
display.
"Main wash" temperature holding
time:
^ Turn the program selector to the f
"STOP" position (the programming
level is only displayed in this switch
position).
^ Press 3 again, "E04" (programming
level 4) appears in the display. Then:
^ Turn the program selector back to
the program which needs to be
changed. The actual value appears
in the display after min.
^ Press 4 until the required value
appears in the display.