Setting The Water Softener - Miele G 7859 Operating Instructions Manual

Water softener

Setting the water softener

^ Switch the machine off.
^ Turn the program selector to f
"STOP".
^ Press 4 and 6 at the same time,
hold them in and while doing so
switch on the machine with the I-0
mains switch.
The actual program status "P..."
appears in the display.
The p / 6 indicator light illuminates.
^ Press 3 once, and "E01" (program
level 1) appears in the display.
^ Turn the program selector six switch
positions to the right (6 o'clock
position).
The number "19" appears in the
display (the factory water hardness
setting in °d), (equivalent to 340
mg/l).
^ Press 4 as many times as is
necessary, or hold it in until the
required value (degree of hardness
in °d) appears in the display.
The counter returns to "0" after
reaching "60".
^ Press 6. "SP" appears.
^ Press 6 once more. The setting will
now be stored. The display clears.
^ The machine is now ready for
operation.
14