Miele G 7859 Operating Instructions Manual page 35

"Final rinse" temperature:
^ Turn the program selector to the f
"STOP" position (the programming
level is displayed only in this switch
position).
^ Press 3 again, "E05" (programming
level 5) appears in the display. Then:
^ Turn the program selector back to
the program which needs to be
changed. The actual value appears
in the display after °C.
^ Press 4 or hold it in, until the
required value appears in the
display.
Programming special functions
"Final rinse" temperature holding
time:
^ Turn the program selector to the f
"STOP" position (the programming
level is only displayed in this switch
position).
^ Press 3 again, "E06" (programming
level 6) appears in the display. Then:
^ Turn the program selector back to
the program which needs to be
changed. The actual value appears
in the display after min.
^ Press 4 until the required value
appears in the display.
Having changed a value or all values:
^ Press 6. "SP" appears in the display.
^ Press 6 again. The change has
been recorded.
35