Table of Contents
Advertisement
CMOS failure
NIC failure
SCSI failure
LED
RED
Flash 1
STATUS
Flash 2
Flash 3
On/Flash
NETWORK
10/100
On/Flash
DEVICE
6.6.
Power Supply
The board is also unique in that it has been designed to support the two most common types of power supplies used today
(AT and ATX). This flexibility will allow it to be installed in nearly all enclosures. The ATX power supply is recommended and
comes standard with all VR-N100U rackmount systems.
NOTE1:
When selecting the ATX power adapter, do not forget to attach an ATX power switch to CN6 pin set.
Page 87 of 98
VR-N100U USERS MANUAL
GREEN
On
Off
POST (Power On Self-Test)
Off
ROM Checksum Error
Off
Memory Error
Off
Error as No Bootable Disk
On
On
Boot up into OS
Off
Software Controlled
Off
On/Flash
LAN1 Hardware Activity
Off
Off
No Network Activity
On
Off
LAN1 10Mbit Ethernet Connection
Off
On
LAN1 100Mbit Ethernet Connection
Off
Off
LAN1 is not Connected
Off
Device Activity on SCSI Bus
Off
On/Flash
Device Activity on IDE Channel(s)
Off
Off
No Device Activity
All Items Are Subject To Change Without Notice
DESCRIPTION
Feb. 2004 Rev 1.0
Advertisement
Table of Contents
