Keypad; Led Indicators - JVC VR-N100U User Manual

Keypad

Each key has a different function, illustrated by a directional arrow just above and to the left of the key. From left
to right, the first key is the Up key. The next key is the Down key. The third key is the Back key. And, the last
key, the key on the right, is the Enter key.
Up

LED Indicators

The LEDs are identified by a keyword above each light on the unit and by the complete name of the LED in the
following graphic. The LED lights can flash green, amber, or red, each color indicating a different state or activity
of the system. The chart below summarizes the LED indicators.
LED Label
Status
Network
Network Activity
(LAN1-Backbone)
10/100
Network Speed
(LAN1-Backbone)
Drive
Drive Activity
Status: The Status LED, the first light on the left, cycles through its power-on sequence as the VR-N100U boots up.
It starts out solid red during self-test. Solid amber indicates the server is booting the OS and the application.
Solid green indicates the VR-N100U has successfully powered on and dynamically acquired an IP address.
The Status light will remain solid green throughout normal operation. If the Status light slowly blinks amber,
VR-N100U has failed to dynamically acquire an IP address. You must simply use one of the four methods
outlined in the manual to manually acquire an IP address. When VR-N100U is in the process of updating or
reflashing the VR-N100U firmware, the Status LED will flash quickly between green and amber. Under no
circumstances should the process be cancelled or power be removed from the unit during the reflash. A
partial or terminated operation may result in a dysfunctional unit.
Network: The Network Activity LED flashes green when there is network traffic from an external source on LAN1, the
network backbone. When the Network LED flashes amber, it means the VR-N100U is transmitting
information between the cameras, storage and/or clients over the network.
Page 13 of 98
VR-N100U USERS MANUAL
Down Back
Color Aspect
Red Solid
Amber Solid
Green Solid
Amber Flashing
Green/
Blinking
Amber
Green Flashing
Amber Flashing
Amber Solid
Green Solid
No Light
Green Flashing
Red Flashing
All Items Are Subject To Change Without Notice
Enter
Description
Power-On: Solid Red during power-on indicates a self-test. When
the self-test is completed, the LED transitions to amber and
continues the power-on process.
Power-Off: Solid Red during power-off indicates a safe halt, after
which power can be safely turned off on the VR-N100U
Power-On: Solid Amber during power-on indicates that VR-N100U
has completed the self-test and is booting the OS and application.
Indicates that VR-N100U is completely initialized. It has acquired
and IP address and is operational.
Indicates that VR-N100U was unable to acquire an IP address. It
defaults to the address 10.10.10.10.
Indicated that VR-N100U is reflashing the firmware.
NEVER INTERRUPT THIS PROCESS!!!
Indicates that network traffic from an external source
Indicates that the VR-N100U is transmitting
Your network speed is 10 Mbps.
Your network speed is 100 Mbps.
Indicates that there is no network link visible to the VR-N100U
An IDE drive is reading or writing data.
A SCSI drive is reading or writing data.
Feb. 2004 Rev 1.0