Enter below the serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No: VR-609 Thank you for purchasing this JVC product. Serial No: Before operating this unit, please read the instructions carefully to ensure the best possible performance.
VR-609 Thank you for purchasing this VR-609 Digital Video Recorder. - C O N T E N T S - 1. Impo r tant Safeguards --------------------------------------------------------------------- 6 2. Part Names and Features ----------------------------------------------------------------- 17 2.1 Basic Organization of DVR System ----------------------------------------------------------------- 17 2.2 Features ----------------------------------------------------------------------------------------- 18...
Page 4
VR-609 5. Main Menu ------------------------------------------------------------------------------------------ 39 5.1 Camera Setup ------------------------------------------------------------------------------------- 40 5.1.1 Camera Control --------------------------------------------------------------------------------- 40 5.1.1.1 Pan/Tilt Camera ----------------------------------------------------------------------------- 40 5.1.1.2 How to Use --------------------------------------------------------------------------------- 41 5.1.2 Camera Details ----------------------------------------------------------------------------- 42 5.1.2.1 How to Setup -- - - -- - - - - - - - - - - - - -- - - - - - - - - - - - - -- - - - - - - - ----------------------- 42 5.1.2.2 Came ra Na me...
Page 5
VR-609 5.7.3 H D D Management - - -- - - - - - - - - - - - - -- - - - - - ----------------------------------------- 67 5.7.3.1 HDD Information --------------------------------------------------------------------------- 68 5.7.3.2 Overwrite Disk When Disk Full --------------------------------------------------------------------- 69 5.7.3.3 Clear All Previous Log ------------------------------------------------------------------------- 69...
VR-609 1. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Page 7
Part 15 of the FCC Rules. CHANGES OR MODIFICATIONS NOT APPROVED These limits are designed to provide reasonable BY JVC COULD VOID USER’S AUTHORITY TO protection against harmful interference when the OPERATE THE EQUIPMENT. equipment is operated in a commercial environment.
Page 8
VR-609 SAFETY PRECAUTIONS(VR-609E) POWER SYSTEM IMPORTANT (In the United Kingdom) Connection to the mains supply Mains Supply (AC 230 V) This unit operates on voltage of 220 V to 240 V AC, WARNING – THIS APPARATUS 50 Hz/60 Hz. MUST BE EARTHED...
Page 9
VR-609 SICHERHEITSVORKEHRUNGEN(VR-609E) SPANNUNGSVERSORGUNG WARNUNG Anschluss am Netz Bei dem Gerät handelt es sich um ein Klasse-AProdukt. Die Betriebsspannung für dieses Gerät beträgt In Haushaltsumgebungen kann ein solches Produkt AC220 V bis 240 V, 50 Hz/60 Hz. Funkstörungen verursachen. In einem solchen Fall muss Hinweis: der Benutzer geeignete Maßnahmen ergreifen.
Page 10
VR-609 INSTRUCCIONES DE SEGURIDAD(VR-609E) SISTEMA ELÉCTRICO ADVERTENCIA Conexión a la alimentación Esto es un producto de Clase A. En un ambiente Esta unidad funciona bajo una tensión de entre doméstico, este producto puede ocasionar 220 V y 240 V CA, 50 Hz/60 Hz.
Page 11
VR-609 SAFETY PRECAUTIONS(VR-609U/E) WARNING: • Maintaining the unit (Please turn off the power TO REDUCE THE RISK OF FIRE OR ELECTRIC before performing maintenance work.) SHOCK, DO NOT EXPOSE THIS APPLIANCE Please wipe the unit with a soft cloth. Do not wipe it with TO RAIN OR MOISTURE.
Page 12
VR-609 SICHERHEITSVORKEHRUNGEN(VR-609U/E) ACHTUNG: • Pflege (Vor der Reinigung des Gehäuses ist das UM DER GEFAHR VON BRÄNDEN UND Gerät vom Strom zu trennen.) ELEKTRISCHEN SCHLÄGEN VORZUBEUGEN, Reinigen Sie das Gerät mit einem weichen Tuch. Wischen Sie es nicht mit Verdünner und DARF DIESES GERÄT WEDER DEM REGEN...
Page 13
VR-609 PRECAUTIONS DE SECURITE(VR-609U/E) AVERTISSEMENT: • Entretien du châssis (Débrancher l’appareil du POUR EVITER LE RISQUES D’INCENDIE OU secteur.) D’ELECTROCUTION, N’EXPOSER L’APPAREIL Essuyer l’unité avec un chiffon doux. Ne pas l’essuyer NI A L’HUMIDITE NI A LA PLUIE. avec un diluant de peinture ou de benzène, cela risque de faire fondre ou de ternir le revêtement.
Page 14
VR-609 INSTRUCCIONES DE SEGURIDAD(VR-609U/E) ADVERTENCIA: • Mantenimiento de la unidad (desconecte la PARA REDUCIR EL RIESGO DE INCENDIO O alimentación antes de realizar cualquier operación DESCARGAS ELÉCTRICAS NO EXPONGA ESTE de mantenimiento.) APARATO A LA LLUVIA O A LA HUMEDAD.
Page 15
VR-609 NORME DI SICUREZZA(VR-609U/E) AVVERTENZA: • Pulizia dell’apparecchio (da effettuare dopo aver PER RIDURRE IL RISCHIO DI INCENDIO O DI staccato la presa di alimentazione) FOLGORAZIONE NON ESPORRE Pulire l’apparecchiatura con un panno morbido. Non L’APPARECCHIO ALLA PIOGGIA O Pulirla con panno più sottile o benzene affinchè la ALL’UMIDITA’.
Page 16
The hard-disk is a consumable item. Replacement is recommended after 10000 hours of use (if used in a 25°C environment). For information on maintenance planning and costs, consult your nearest JVC dealer. •Handling of the Hard-disk Please do not extract the removable Hard-disk or do not move this equipment for 15 seconds after OPERATE OFF.
VR-609 2. Part Names and Features 2.1 Basic Organization of DVR System About the number of contents, see 9.Specifications(P.98). Contents and shape can be different. Rack Mount Bracket Lock Key VR-609 Rack Handle Hard Rack Screw Rack Handle Screw CD-ROM...
VR-609 2.2 Features 1) High quality digital recording Output and playback High quality digital recording by using Wavelet compression. 2) Remote data back up It is possible to back up and playback by using client program via network. 3) Backup (IEEE1394, USB) Video images can be stored in an internal HDD, removable HDD or external IEEE1394 HDD.
VR-609 2.3 Preparation of installation ■ Not using a Rack (1) Attach rubber feet. - Attach 4 rubber feet in the bottom surface of the equipment with provided 4 rubber foot screws (M3 x 8mm). Do not use except provided screws as this may cause malfunction. Please use rubber foot screws provided.
VR-609 2.4 Part Names and Description ■ Front ⑧ ⑨ ⑩ ① ⑫ ⑬ ② ④ ⑪ ③ ⑦ ⑤ ⑥ ① Operate Switch : ・Operate ON/OFF switch. Operate on/off by pressing this button for about 5 seconds. During system starting, it is displayed "9 CH Digital Video Recorder"...
Page 21
VR-609 ④ IMAGE SEQUENCE Button : ・This button is for replay PB screen to IMAGE SEQUENCE mode. ▲ (up) Button : ・Menu Navigation Button. Moves cursor up. ⑤ ZOOM Button : ・This is used to zoom a freeze-frame in live or playback mode. Selected screen is ENTER Button : ・This is for selecting set-up Menu.
Page 22
VR-609 ■ Rear ⑤ ⑨ ⑩ ① ② ⑭ ③ ⑧ ④ ⑥ ⑦ ⑪ ⑫ ⑮ ⑬ ① LAN : Enables screen search and control via Network. (Please use a category 5 cable with a shield.) ② USB Port 1,2 : For backup with external FDD or memory stick. It does not work both USB1 &...
VR-609 3. Explanation and Application 3.1 Basic Schematic of the DVR System In this Instructions, Digital Video Recorder is written as "DVR". ・This system can record up to 9 composite video signals. ・Ability to check multiple screens during playback by using monitors & VGA units.
VR-609 3.2 Basic Connections LAN Connector USB Connector (RJ-45) (TYPE A) RS-485 Connector REMOTE Connector (RJ-45) Alarm IN Connector Alarm OUT Connector VGA OUT Connector IEEE 1394 Connector (15 PIN) (6 PIN) VIDEO IN Connector Y/C OUT Connector (BNC) (S-Video)
Switch 8 : ON power supply (RX TERM) DVR VR-609 ・Camera power connection. ・Control terminal connection (RS-485) : Please use a twisted-pair cable. Connect a +terminal (TX+) / -terminal (TX-) of this equipment to the RX+ / RX-terminal of a Pan/Tilt camera.
RM-P2580 grade. Please read the Instructions of RM-P2580. ・About setting values of VR-609, please refer to 5.1.2 Camera details (P.42) and 5.1.3 Pan/Tilt Model Select (P.45). If there are OFF/ON of a camera power supply when not performing a home position setup, camera angle will return to the factory setting.
・Configuration of camera settings as well as operation of camera are possible via an external remote controller. Operation of camera from the VR-609 unit will be disabled when an external remote controller is connected. ・Connect the RS-485 signal wire from the junction box to the "REMOTE" terminal.
VR-609 3.4 External Product Connections and Applications 3.4.1 External Product Connection of ALARM INPUT and Application There are 9 alarm jacks for external devices. Able to set-up REC ON/ OFF and Digital out motion according to ALARM IN signals. GND 1 2 3...
VR-609 3.4.2 External Product Connection of ALARM OUT and Application Supports up to 4 separate alarms for motion control or alarms. Possible to install output-events to each out terminal from the menu. ■ OUTPUT EVENTS ・Digital inputs to alarm 1~ 9, Disk Full, Video Loss, Power Off, Admin. PW Changed, Motion Detect.
VR-609 3.5 Installation and Application for Network Interface 3.5.1 Connection and Installation for Remote Control Supports Web server, remote control, and remote file transfer due to 10/100 mega Ethernet I/F. Remote monitor / playback / operation, depend on network quality. When the network quality is bad, the connection could be cut or the playback could be slower.
VR-609 3.5.3 Network Setup ____.____.____.____ IP Address ____.____.____.____ Subnet Mask ____.____.____.____ Gateway ____.____.____.____ Web Server Port Number : ___ We highly recommend you consult the Network Manager. ・IP Address : This is the name of the product in TCP/IP. You can use any IP in one Network.
VR-609 3.6 Application of Remote Control Software 3.6.1 Using the "Remote Control Software" This is for viewing live or searching playback screens from a remote location. (Quality of the live screen depends on the recording quality and Network condition.) ■ How to Setup 1) Start Web browser.
VR-609 3.6.3 Live Screen Search ② ① Playback Screen Search ①This is for searching 1, 4, or 9 channels simultaneously from a remote location. ②When there is an alarm input from an Alarm In connector, it will be displayed on a screen upper left as "Sensor."...
- Support converting to AVI format to play with Windows Media Player * Installer/ Menu/ buttons are written in English. ■ CD-ROM Content Following files and folder are in CD-ROM. (1)"VR-609 ClientSW" Folder Client software. As double click "setup.exe" as start installation. (2)"VR-609 ClientSW Manual(Japanese).pdf" Instructions of this software. (Japanese) (3)"VR-609 ClientSW Manual(English).pdf"...
VR-609 4. Function Explanation and Menu Setting This system can set-up the motion conditions of the camera, recording conditions, alarms, audio, and system settings from the monitor menu. 4.1 Front Button Explanation 4.1.1 Before Use Make sure all the devices are properly connected as described in Chapter 3, then connect to the power source.
VR-609 4.1.3 REC ・By pressing this button, recording starts. The REC LED is on while recording. As pressing this button again, recording is stopped. The REC LED blinks during the Alarm record. 4.1.4 PLAY ・Press this button to select playback condition. Play LED is on while playing.
VR-609 SHUTTLE ・JOG & SHUTTLE can search by frame in play mode by using JOG when it is paused ( ll ) and possible to quick search by an angle of the shuttle. ・At the menu setting, it is possible to move the position or change the value by using JOG .
VR-609 4.1.7 Explanation of Image Sequence and Triplex ■ IMAGE SEQUENCE : ・One playback channel is replayed to the divided screen field by field in sequence. Press the display button to select the type of display division. Image Sequence Playback Screen of 9 Channel ■...
VR-609 5. Main Menu Camera Control, set-up Manual Camera Details, Recording, Pan / Tilt model. Schedule, (→P.40) Alarm Recording. (→P.46) set-up Alarm Name, Alarm Link. Select 8 screen (→P.59) group which is displayed when you press the “User” button. set-up Audio.
5.1.1 Camera Control ・RS-485 enables long distance transfer. ・Possible to connect in daisy-chain style. System Configuration Ex.)You can construct the system by VR-609 1unit, TK-S576B 5 units, and TK-S655 4 units. 5.1.1.1 Pan/Tilt Camera Examples of Camera Rotation Camera ID Setup...
5) Press the EXIT button to return to the Camera Setup Menu. ・Operation of cameras from the VR-609 unit will be disabled when an external remote controller is connected. ・Status on the screen is not updated during camera operation. Date/time will not be displayed as well.
VR-609 5.1.2 Camera Details Setup channel ・Installs Name, Camera ID (Pan/Tilt Camera), Model and Color (Brightness, Contrast, Saturation, Hue) of each channel. 5.1.2.1 How to Setup 1) Checks the channel number as indicated at the bottom of the tab, and then checks whether the background is the correct screen.
VR-609 5.1.2.2 Camera Name Create an alphanumeric nickname of up to 16 characters (including symbols) as shown below. Turn the Jog to see the next character repeatedly. Character Mark Blank ! “ # $ % & ’ ( ) ” + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \...
VR-609 5.1.2.4 Adjustment ・Possible to adjust each input video color ( Brightness, Contrast, Saturation ) value as a number 0~100 and Hue can be adjusted as a number -128~127. Please, adju st a proper value for a background checking screen.
2) Press the up/down button or turn the Jog to select the Model. 3) Press the ENTER or EXIT button to finish setup. * If you connect with TK-C676/TK-C655, please select "JVC CAMERA" ■ Baud Rate (Factory default is 9600 bps) 1) Press the ENTER button.
VR-609 5.2 Recording Setup 5.2.1 Manual Recording Manual Recording is for setup recording condition of each channel as pressing REC button when it is not recorded according to schedule. ・You can select ON/OFF of Schedule Recording by the check BOX.
VR-609 5.2.1.1 Recording Events Press the ENTER button at the selected block to set-up Recording Events of block like the below picture. ・Field Rate of Always ・Field Rate of Alarm/Motion. (Can not specify less than 1F/1Sec.) ・Changes ON/OFF of a check BOX by using ENTER button.
TIMER STANDBY or TIMER RECORD. VR-609 does not have a power-saving mode. ・Please do not set-up a channel without video input as record. Please remove all checks such as Always, Alarm, and Motion.
VR-609 5.2.2.2 How to Setup ・Recording Schedule is set-up in block. Minimum block is an hour. ・Recording block is displayed red. No recording block is displayed black. ・Selected block is displayed blue. ・You can set-up Recording Schedule by moving the yellow bar.
VR-609 ・Field Rate of Always ・Field Rate of Alarm/Motion. (Can not specify less than 1F/1Sec.) ・Check/Uncheck the check box to enable/disable recording. Use the ENTER button to check/uncheck the check box. ・Always: Recording during the schedule period. ・Alarm: Record when the selected alarm is received.
VR-609 ・When Recording Quality is set at HQ3, you can choose ON/OFF of "Simultaneous Recording/ Playback". Trying to reproduce on the mode, "Simultaneous Recording/ Playback is not available. Please confirm the recording setting." will be displayed. (When you set-up the Alarm / Motion recording mode, this unit can not execute playback because it is on the recording stand-by mode.)
VR-609 5.2.2.7 Copy Schedule The Copy Schedule window can be opened by pressing the "Copy To" button. ・Able to copy the program under setup. ■ Copy Schedule (Days) ・Data copy on a Days-basis. ・The button highlighted with the black border indicates the day that is currently under configuration.
VR-609 5.2.2.9 Specific Day Schedule ・You can configure the recording schedule of a specific day by pressing the ENTER button in the ‘Specific Days…’. ⑥ ① ⑦ ② ③ ④ ⑤ ① Using the left/right arrow buttons and the ENTER button and selecting the ‘Add’, you can add and configure new “Specific Day Schedule”...
VR-609 5.2.3 Maximum recording Field/Sec As each input channel is selected, the maximum recording Field/Sec can be changed. ■ Input video signal mode : NTSC 1CH → 30F/S 2CH → 30F/S 3CH → 15F/S 4CH → 15F/S 5CH → 10F/S 6CH →...
VR-609 5.2.4 Alarm Recording ・Set-up recording time which is before event and after event when its’ Alarm/Motion Events. ・The RECORD Indication LED and ONSCREEN display might be displayed for several seconds longer than actual record time. ・set-up Alarm Input.(1-9) ・Alarm recording are the time which the alarm terminal is a MAKE up, the Pre- Recording Time before a MAKE up, and the Post-Recording Time after a MAKE up.
Page 57
VR-609 ■ How to Setup 1) Move the cursor using the up/down/left/right buttons or Jog. left/right buttons up/down buttons 2) Area field setup is moved to the place by jogging and can check the field by using ENTER button. 3) After setup is finished, press the EXIT button to move to Alarm Recording menu.
VR-609 5.3 Alarm Setup Alarm Setup is used for connecting with external devices such as alarm or buzzer. 5.3.1. Alarm Name ■ How to Setup 1) Select alarm channel using the up/down button or Jog. 2) Press the ENTER button.
VR-609 5.3.2 Alarm Link Setup Alarm output number Present output number is 1 ・Select condition of Alarm Out. Alarm inputs are 9EA and Alarm outputs are 4EA. ・The above menu will display as checking Alarm Link button. 1) Alarm (left of the above picture) : Sets up which alarm will be output when alarm occurs.
VR-609 5.3.2.2 Events ・Checks event you want to detect from the Events menu by using Jog and ENTER button. ・Each event type is indicated by the following. ・Disk Full : When HDD is fully recorded. ・Admin.PW Changed : When Admin Password has been changed.
VR-609 5.4 User Define Screen User can organize the screen to your personal preference by using the user button. It is very convenient if you use AUTO function at User Screen. ■ How to Setup 1) Select one of 5 variations of multi-screen views by using left/right buttons or Jog.
VR-609 5.5 Audio Setup ・Audio is capable of recording one channel. ・Sampling Rate is 8 KHz. ・Bypass is possible to Audio Out as recording Audio. ・Master Gain is from 0 to 5. 0 is standard input status. (-5db) ・Audio can be recorded, provided that Audio of Channel Selection at Recording Setup is checked.
VR-609 5.6 Menu Setup VR-609E VR-609U ・Language is set-up at English and able to change to French and Spanish on VR-609U. (English, German, French, Spanish, Italian, Portuguese, Russian, Chinese are available on VR-609E) ・ Status : It controls transparency of present status( channel name, recording status indicator, clock, indicator of HDD recording amount ) which is displayed on screen.
VR-609 5.7 System Setup You can check the product motion. Checks Alarm Log. Select Main/Backup HDD. Back up data by using HDD. set-up motion contents of Auto set-up Spot Output button. and VGA Output. Network Setup, Check system Date/Time Setup, version.
Page 66
VR-609 The HDD number which shows the log. ・On the system log display screen, if you chose a log line by the vertical button or JOG Dial and then press the ENTER button, playback the recorded image starts from the time when the log was recorded.
VR-609 5.7.2. Alarm Log ・Displays the time and channel which detects alarm /motion on system. The HDD number which shows the log. ・Searches/Displays the Alarm Log of each of the HDDs. Use the Left/Right buttons to search the HDD accordingly using the relevant search criteria.
VR-609 5.7.3.1 HDD Information If cursor is united with arbitrary HDD and the ENTER button is pressed, the information on HDD can be displayed. ・For information of Local HDD. ・For information of external IEEE 1394 HDD. Click the "Indicate" button to know which HDD is.
VR-609 ■ Initialize ・If you press "Initialize" button at Main HDD, "Data stored in HDDs numbered larger than x will be lost. Are you sure?" is displayed. As pressing "Yes" button, HDD will initialized. Please note all HDD for main after specified HDD is initialized.
VR-609 5.7.3.5 How to Setup removable HDD About removable HDD Please consult your nearest JVC dealer about the model of the connectable removable HDD. 1) Add new HDD. ① When adding a new HDD, you must turn the power off ②...
Page 71
VR-609 ■ How to connect removable HDD The jumper of HDD which connects additionally, set-up as slave. (Refer to HDD’s user manual for setup jumper.) Separate inside Disengage the claws Connect data cable of rack from hard rack. at the side of the rack...
VR-609 5.7.4 Backup ・Record a portion of the main HDD content to a Backup HDD. ・Possible to backup HDD and CD. ■ How to Setup 1) Set-up start and end dates by using Jog and the right/left button. 2) When the Watermark box is checked, a digital watermark is placed on the image during backup, and tampered data can be detected during playback.
Page 73
VR-609 ・This message is displayed if there is ・This message is displayed if there is no CD-recorder when backup at CD. no CD for backup when backup at CD. ・This message warns that recording is ・This message is for warning the data of stopped while data is being backed CD could be lost while erase CD.
VR-609 5.7.5 Auto Select ・Select Delay and Skip of the Auto Switch. ・On 4 divided screen, switches the screen by block. Ch1-4, Ch5-8, and Ch9 are looked upon as 1 block. ■ How to Setup 1) Auto Select function is for automatic switchover of the Monitor screen.
VR-609 5.7.6 Video Output ・Choose the kind of Spot Output. ・Monitor Out : Spot Output is the same as the Monitor Out. ・Input Channel : the selected channel is displayed. ・Auto Select : Choose channels to display. The video loss channel can be skipped, or a Monitor Output screen can be built into an Auto Select.
VR-609 5.7.7 Administration This is for remote security. For setting date/time as well as order of year, This is for Setting month and day. password. This is for setting Covert Channel web password. allows Administrator to DVR will send an...
Page 77
VR-609 ■ How to Setup 1) Move to the place you want to change the setup by using Jog. 2) Select contents to change by using the ENTER button. 3) Select place to change by using the right/left button. 4) Select the number you want by using Jog.
VR-609 5.7.7.2 Date/Time Setup ・Set-up Date and Time, which will be used in the system. ・Set-up “Date Display”. ■ How to Setup 1) Move to the place you want to change the setup by using up/down buttons or Jog. 2) Select contents to change by using the ENTER button.
VR-609 5.7.7.3 Password ・Click the "Use Password" check box to use Password. ・ The password must be 4 digit numbers. ・ Enter “New Password” and “Confirm” using Channel Selection buttons. Please use the each 1-9 Channel Selection buttons. ・ Setup : Setup menu, PTZ : Control camera, REC : Recording, PB : Playback.
Page 80
・If you operate quickly, possible to miss Master Password. Please be careful. ・Enter Master Password on Password. ・As use Master Password, possible to enter to the menu. When you have forgotten both the password and the master password, please consult your nearest JVC dealer. -- 80 --...
VR-609 ■ How to Setup 1) Check the box to activate passwords. 2) Select a new password and then enter again for confirmation. 3) Select a new password by using Jog. 4) Enter “New Password” and “Confirm” through Channel Selection buttons. Please use the each 1-9 Channel Selection buttons.
VR-609 5.7.7.5 Covert Channel ・Covert Channel Selection should be setup to use password. ・The selected channel at Monitor/Playback is only possible to record and live screen or playback screen is displayed with V-Loss. If you want to see playback screen, you must use Administrator Password.
Page 83
VR-609 ■ Events : DVR will send an email when any of the checked events occur. ■ Conditions : It sends email at Start and End time as setup. 1) Start/End : Defines the time interval during which emails will be sent based upon the selected events.
VR-609 ・An 8 character ID may be selected to identify a recipient. ・Email address are entered into the menu and can include up to 128 characters. Mail notification is not carried out when alarm / motion are detected after starting alarm / motion recording (retrigger).
VR-609 5.7.7.8 Remote Control Setup ■ Wireless ・When the Operation Lock box is checked, all buttons except the Menu button will be disabled. This is used to prevent erroneous operations when using the remote controller. ・Control IDs can be set to a number between 1 - 9. (See also 7. Remote Controller (P.93) for configuration of ID.)
VR-609 5.7.9 Default in Setup Menu Camera Setup Recording Setup Alarm Setting Name : Not installed Manual Recording : ON Alarm Name : Not installed Control ID : Schedule Recording : OFF Alarm Input 1-9 : All OFF the same as a camera No.
VR-609 5.8 Monitor Display ● Recording Status ( According to color ) 1) RED : Camera is Recording. (Always recording) 2) RED(A) : Camera is Event recording by motion detection or alarm input. 3) BLUE : DVR is on monitoring. (No recording, just for monitoring) 4) WHITE : No input signal.
VR-609 5.9 Playback The below picture will be displayed by pressing the PLAY Button. ■ Time Search: Set the date/time to play back. ・If you replay past time than the time which is recorded on HDD, it is replayed the first recorded screen.
Page 89
VR-609 ■ Continuously : Starts playback continuously from the stopped position. The PLAY button can be used as a shortcut key of the "Continuously" button. The PLAYBACK starts without cursor position. ■ From The Beginning : Replays images beginning at the start of HDD No.1.
VR-609 ・The playback speed may not be the consistent with the record speed. ・A motion may become unnatural at the time of playback. ・During replay external IEEE1394 HDD, screen should wave because of data transfer speed. ・If DVR has HDD impact or other damage during replay, screen could be stopped in a moment or different channel could be displayed.
VR-609 6. External Backup ・Please operate ON this equipment after turning ON a power switch of all peripheral equipments. ・Please turn OFF a power switch of peripheral equipments after Operating OFF this equipment. 6.1 External USB Port 6.1.1 Connect with External USB Port USB1.1 port will allow you to connect to a FDD or USB memory device to record still...
6.2.1 Connect with External IEEE 1394 Port About removable HDD / external IEEE1394 equipments Please consult your nearest JVC dealer about the model of the connectable removable HDD and connectable IEEE1394 equipments. ・The IEEE1394 port is used to connect to external devices as a HDD or CD-RW drive to back-up images.
VR-609 7. Remote Controller 7.1 Outline ① ② ③ ④ ⑤ ⑦ ⑥ ⑧ ⑨ ⑩ For the first step, you need to give an ID for control DVR by one remote controller. ・Press one of INPUT button (1~9) and STOP on DVR at the same time then the number which you pressed will be the ID.
Page 94
VR-609 7.2 Details ① ・REC Button : When the REC LED is on, DVR is recording as per set-up instructions. ② ・ALARM RESET Button : Stops the Alarm Output. ③ ・INPUT Button :These buttons are used to select the screen monitors and to change the channel settings at the menu.
Page 95
VR-609 ・MENU : ⑦ This button is for selecting or canceling the monitor setup menu mode. ・MULTI : This button is for canceling Image Sequence or Triplex mode. ・TRIPLEX : To see live and PB screen at the same time as making replay screen to PIP mode.
Page 96
VR-609 ■ Working Range of Remote Controller Signal Receiver Within 6m Supports to use as below. ( Standard DVR receiver) · Distance : within 6m 30° Angle : within 30˚ 30° ・Do not leave any material near the signal receiver between remote controller and DVR.
VR-609 9. Specifications Parts Item VR-609 U/ E Number of Channels Q’ty (EA) Camera Input Signal Video Signal NTSC Signal Input Composite 1.0V With Loop Output, BNC Input Signal Processor Compression Type Wavelet based No. of pixels (H x V)
Page 99
VR-609 Back_up & Copy IEEE1394 1EA, HDD, CD-R/RW 2EA, Flash Memory, FDD Watermark Available (CD/HDD Backup, Still Picture Capture, Download) Alarm Control Alarm Input 9EA, Low Active Alarm Alarm Output 4 EA, Low Active Alarm, TTL Level Output Mode Alarm Input, V-loss, Motion, Disk Full,...
Page 100
VR-609 Accessory Rack Mount Bracket Rubber Foot Rubber Foot Screw RS-485 connector Alarm In connector Alarm Out connector Rack Handle Rack Handle Screw Hard Rack Screw <Appearance> 11.5 [unit : mm] Specifications and appearance of this unit are subject to change for improvement without prior notice.
Page 102
is a registered trademark owned by Victor Company of Japan, Limited Printed in Korea is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. LLT0083-001B-K Victor Company of Japan, Limited...