Electrolux Next Gen 30" Service Manual page 120

Lock switch arm:
1. Remove the lock mechanism cover and remove
shoulder screw holding switch arm to mechanism.
Shoulder screw location
2. Remove the cover from the rear of the range, remove
the nut and bolt that hold the switch arm to the lock
switch mechanism, and slide the arm out the back.
Switch arm at rear of range
Lock mechanism mounting screws
Lock mechanism:
1. Disconnect power, remove the lock mechanism cover,
remove the locking arm and pull the lock switch arm
back out of the lock mechanism area.
2. Remove the four screws holding the lock mechanism
to the lock mechanism pan and lift the mechanism
out.
Burner box side panels:
1. The burner box side panel is held to the burner box
by three screws and the side panel by one screw.
2. To remove a burner box side panel, remove the main
top and the three screws holding the burner box side
panel to the burner box.
Burner box side panel screws
3. Remove the one screw holding the burner box side
panel to the side panel and pull the bottom burner
box side panel out.
Side panel screw
120