Removing Fluorescent Lamp Socket; Removing Splasher Panel; Removing Grates, Griddle Cover Griddle Fifth Burner Pan And Main Top; Removing Pressure Regulator - Electrolux Next Gen 30" Service Manual

Fluorescent lamp socket:
1. Disconnect power from range, and remove the
backguard back panel.
2. Disconnect the wires from the socket, squeeze the
tabs on the end of the socket and push it down
through the splasher panel.
Lamp socket tab
Splash panel:
1. Disconnect power from range, remove the trim, the
backguard back panel, the ballast, and disconnect
the wiring to the fluorescent light sockets.
2. Remove the one screw holding the splash panel to
the burner box and lift the splash panel off.
Splash panel/burner box screw
Main top and burner box area
Grates, griddle cover, griddle, fifth burner pan and
main top:
1. The grates, griddle cover, griddle, fifth burner pan
and main top lift off.
Grates
Griddle
Main top
Pressure regulator
1. Turn the gas off and lift off the main top.
2. Disconnect the incoming gas line at the regulator.
3. Remove the pressure regulator from the manifold pipe
by turning it clockwise.
Pressure regulator
116
Griddle cover
Pan