Electrolux Next Gen 30" Service Manual page 119

Manifold pipe:
1. Disconnect power, remove the main top, top burners,
control panel and top burner valves.
2. Remove the one screw holding the manifold pipe to
the burner box.
Manifold pipe screw
3. Turn the gas off to the range, disconnect the gas
tube that goes from the manifold to the oven valve
using a 9/16" wrench and lift the manifold pipe out.
Manifold tubing connection
Door latch handle knob:
1. The latch handle knob is held in place by one phillip
head screws. Remove the screw and slide knob off.
Latch handle screw
Lock mechanism cover:
1. To remove the lock mechanism cover, remove the
four screws holding the cover to the burner box and
lift the cover off.
Lock mechanism cover
Lock mechanism arm:
1. To remove the lock mechanism remove the lock
mechanism cover, remove the two screws holding
the holding the arm to the lock mechanism and pull
the arm out the front of the range.
Lock arm screws
119