3.3.2 Lead-edge Registration
When a sheet is fed from the Tray to the toner transfer position, the registration of the sheet may not be
correctly maintained due to such troubles as misalignment of lead edges in the Tray.To avoid this
trouble, the lead edge position needs to be aligned at the Regi part before the sheet is fed to the toner
transfer position.
By thrusting the edge of the sheet coming out of the Tray against the Regi Roll that is at rest, the lead
edge of the sheet is registered.
3.3.3 Reference diagram
REGI ROLL
SKEWED PAPER
REGI ROLL
6 – 26
Chapter 6 Principles of Operation
Wsb06019KA
Wsb06020KA