Dell 2130cn Service Manual page 51

Error Message
Panel Message
Paper Jam
077-900
Flip
Open Front Cover
Remove Paper
Paper Jam
077-901
Flip
Open Front Cover
Remove Paper
Paper Jam
077-907
Flip
Open Front Cover
& Duplexer
Flip
Remove Paper
Ready to Print
091-402
Flip
Replace PHD
Now
Flip
Contact Support
PHD
091-912
Flip
Reseat PHD
Status Window
Paper Jam has occurred at
the Output Tray.
CAUTION: The Fuser is hot.
Push the Side Button to open
the Front Cover and remove
the jammed paper.
If the jammed paper is in the
Fuser, lift the levers at both
ends of the Fuser and
remove the jammed paper.
Please click the Show Me
How Button for details.
077-900
Paper Jam has occurred at
the Belt Unit.
Push the Side Button to open
the Front Cover and remove
the jammed paper. Close the
Front Cover.
If the jammed paper is not
easily removed, work after
pulling out the tray.
Please click the Show Me
How Button for details.
077-901
Paper Jam has occurred at
the Duplexer.
Push the Side Button to open
the Front Cover and the
Duplexer.
Then remove the jammed
paper. Close the Front Cover.
Please click the Show Me
How Button for details.
077-907
Replace PHD unit Now.
Contact customer support.
Please click the Show Me
How Button for details.
091-402
Printer error.
Remove the ribbons from the
PHD unit.
Contact customer support if
this failure is repeated.
091-912
Error Contents
<IOT Exit JAM>
The paper remains at Exit Sensor.
<IOT Remain Registration JAM>
The paper remains at the Regi Sensor.
<IOT Remain Duplex JAM>
The paper remains at the Duplex.
<IOT PHD Life Pre Warning>
The PHD Unit is going to reach the
replacement time.
<PHD Tape Staying>
Detect the tape staying on the PHD Unit.
(Toner patch error occurred at new PHD
Unit installing.)
1 - 25
Chapter 1 Troubleshooting
FIP to be
referred
Flows 55
FIP-1. 55
Flows 56
FIP-1. 56
Flows 57
FIP-1. 57
Flows 58
FIP-1. 58
Flows 59
FIP-1. 59