Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 50 PHD Unit (PL4.1.21)
1) Put the paper on the TRANSFER ASSY
(PL6.1.7) to protect the belt.
Note: When carrying out the work this
procedure, take care not to cover the
left and right of the belt guards with the
paper.
2) Mate the left and right arrows on the
Handle of the PHD Unit with the guides of
the printer.
3) Push the PHD Unit into the printer until it
is stopped.
Note: Check that the PHD Unit is secured.
3 - 247