Table of Contents
Advertisement
Maintenance
Headlight adjustment
Proceed as follows:
1. Place the vehicle in running order and with the
tyres inflated to the prescribed pressure, on a flat
surface 10 m away from a white screen situated in
a shaded area, making sure that the longitudinal
axis of the vehicle is perpendicular to the screen;
2. Turn on the headlight and check that the bor-
derline of the projected light beam on the screen
is not lower than 9/10 of the distance from the
ground to the centre of vehicle headlamp and high-
er than 7/10;
3. Otherwise, regulate the headlight by adjusting
the screw «A», after removing the front grille.
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
MAIN - 36
Runner RST 50 SP
- Quick Links:
- Electrical System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Runner RST 50 SP and is the answer not in the manual?
Questions and answers
Что надо сделать что бы поршневая служила дольше
To make the Gilera Runner RST 50 SP piston last longer, ensure proper maintenance by:
1. Using the correct type of spark plug with the recommended electrode gap.
2. Avoiding engine flooding and following correct starting procedures.
3. Keeping the intake joint sealed and in good condition.
4. Maintaining the battery and electrical system to avoid overcharging.
5. Using fresh, standard-quality fuel.
These actions help prevent engine issues that can lead to premature piston wear or damage.
This answer is automatically generated