Notes
–
When the appliance is started up for the first time, the grinder will grind
longer than usual.
–
You can also adjust the cup fill quantity during the dispensing process.
to dispense less coffee, turn the coffee quantity regulator to the left to
the desired quantity, or turn it until the appliance stops dispensing. to
dispense more coffee, turn the regulator to the right.
Preparing two cups of coffee / espresso
Prerequisite: The appliance is ready for operation.
•
Place two cups, under the outlet, one after the other.
•
Press the button for brewing strength
•
turn the coffee quantity regulator (Fig. A, no. ) to adjust the cup fill
quantity.
•
Press the button for two-cup dispensing
→
the double grinding process and the dispensing of coffee start. the standby
symbol
is flashing. Dispensing ends automatically when the set coffee fill
level is reached.
•
to break off the dispensing of coffee prematurely, press the button for
two-cup dispensing
Notes
–
When the appliance is started up for the first time, the grinder will grind
longer than usual.
–
You can also adjust the cup fill quantity during the dispensing process.
to dispense less coffee, turn the coffee quantity regulator to the left to
the desired quantity, or turn it until the appliance stops dispensing. to
dispense more coffee, turn the regulator to the right.
.
to adjust the brewing strength.
.
Need help?
Do you have a question about the Caffeo Solo and is the answer not in the manual?
Questions and answers
I have insert brewing unit error
To fix the "insert brewing unit" error on a Melitta Caffeo Solo:
1. Ensure the brewing unit is correctly inserted and locked in place.
2. If the buttons for single and two-cup operation flash alternately with the On/Off button:
- The brewing unit may be missing or not properly inserted.
- Insert the brewing unit properly.
3. If the brewing chamber is overfilled:
- Switch off the appliance.
- Switch it on again via the On/Off button.
- Repeat if necessary until standby mode is displayed.
4. If all buttons flash continuously (system error):
- Switch off the appliance.
- Switch it on again via the On/Off button.
- If the problem persists, send the appliance to the service organization.
This answer is automatically generated