– Do not undertake any changes You must observe the safety to the appliance, its components instructions to avoid dangers. Melitta ® accepts no liability for damage caused or its accessories. by failure to observe the safety –...
Page 4
Warning! – Children must not play with the appliance. Cleaning and Risk of burning and scalding maintenance must not be Escaping fl uids and steam may undertaken by children younger be very hot. Parts of the appliance than 8 years of age. Children also become very hot.
Page 5
Flashing up or coffee is being play for full drip tray dispensed. Height-adjustable outlet Illumina- Change the Melitta ® Claris water fi lter ® Coffee quantity regulator Filter change in pro- Button for single-cup dispensing Flashing cess.
9. • Plug the power cable into a suitable • After using the appliance for the fi rst power socket. time, insert the Melitta Claris water ® ® • Remove the lid from the bean container fi...
Page 7
Do not use any glazed, caramelised or the need to be descaled in due time. From otherwise sugar-coated coffee beans. the factory, it is set at water hardness 4. After inserting a Melitta Claris water ® ®...
Inserting the water fi lter Setting the water hardness fl ashes during the entire changing The appliance includes a test strip to process. determine the water hardness. • Put the water fi lter in a glass with • Determine the hardness of the tap water tap water for several minutes before using the test strip.
2 months or after 200 – Do not use a steam cleaner. brewed cups, however, at the latest when is fl ashing. Daily cleaning Only use Melitta cleaning tabs. ® • Wipe the outside of the appliance with a • Switch off the appliance.
(„Setting • Place the coffee grounds container the water hardness“, page 19). under outlet 2. Only use Melitta ® ANTI CALC. Cleaning phase 4 ( , the middle • Switch off the appliance. bean is fl ashing): •...
When illuminates, proceed as follows: Display Time • Empty and reinsert the drip tray. 5 minutes (factory setting) • Rinse the water reservoir thoroughly. • Fill the water reservoir with tap water up 15 minutes to the max. mark. • Insert the water reservoir. 30 minutes •...
Brewing temperature • Remove the water fi lter if necessary („Water hardness and fi lter“, page 18) From the factory, the brewing temperature and keep it cool in a glass fi lled with tap is set to Level 2 (medium water.
Troubleshooting Fault Cause Solution Adjust the grinding fi neness more coarse. Coffee only fl ows drop-by- Grinding fi neness is too fi ne. Clean the brewing unit. drop. Perform a descaling or cleaning programme if necessary. Water tank not fi lled or Fill the water reservoir and make sure incorrectly inserted.
Need help?
Do you have a question about the CAFFEO SOLO and is the answer not in the manual?
Questions and answers