When The Alarm Sounds - Silvercrest SWEP 500 A1 Operating Instructions Manual

GB/CY

When the alarm sounds...

• and the "Radio" alarm function has been selected, the radio operates
for one hour at a predefined alarm volume. To switch off press the
Vol.+/AL–1
• and the "signal sounds" alarm function has been selected, the signal
sound is played for 10 minutes. To switch off press the
Vol.–/AL–2
(or
Note:
Please take note that the last tuned radio station together with the last used
sound volume setting is used for the alarm call.
Interrupting the alarm
• Press the button
setting) (see also the section "Set snooze time").
Turning off the alarm function
• Press the
disappear from the screen.
• The alarm function for the current day can be deactivated by pressing
any button (apart from
itself back until the next programmed alarm time.
Vol.–/AL–2
(or ) button.
) button.
SNOOZE
to interrupt the alarm for 10 minutes (default
Vol.+/AL–1 Vol.–/AL–2
or
SNOOZE
button until the relevant alarm symbols
). The multi-band radio will then not switch
- 20 -
Vol.+/AL–1