Furnace Filter; Ventilator Filter (If Installed); Uv Lamp; Low Temp Alert - Ecobee 3 smarter wi-fi thermostat User Manual

Furnace Filter

Generates an alert that indicates it is time to clean or replace
the filter on the furnace, if installed. You can set the Last Filter
Change date, turn the Reminder On or Off, and set the
Frequency of the maintenance interval.

Ventilator Filter (if installed)

Generates an alert that indicates it is time to clean or replace
the filter on the ventilator, if installed. You can set the Last Filter
Change date, turn the Reminder On or Off, and set the
Frequency of the maintenance interval.

UV Lamp

If the HVAC system uses a UV lamp for air purification, your
ecobee3 can generate an alert indicating that it is time to
clean or replace the lamp. You can set the Last Lamp Change
date, turn the Reminder On or Off, and set the Frequency of the
maintenance interval.

Low Temp Alert

Sets the temperature at which the thermostat will generate a
Low Temperature Alert. The range can be:

Enable/Disable: Configures if alert is shown on thermostat.

A temperature range of 35 to 68 °F (1.5 to 20 °C).

High Temp Alert

Sets the temperature at which the thermostat will generate a
High Temperature Alert. The options are:

Enable/Disable: Configures if alert is shown on thermostat.

A temperature range of 60 to 104 °F (15.5 to 40 °C).

Aux Heat Runtime Alert

Sets the amount of time that the Auxiliary heat source, if
installed, is can run continuously before an alert is generated.
The options are:
 Disabled: No alert will be generated.
 A time from 30 min to 8 hrs

Aux Outdoor Temp Alert

If you have a heat pump with an auxiliary heat configuration,
you can configure your ecobee3 to generate an alert if the
auxiliary heat is called for when the outdoor temperature
exceeds this programmed set point. The programmed set point
can be between 32 to 80 °F (0 to 26.5 °C)
This feature requires an Internet connection to function properly.

Low Humidity Alert

Sets the percentage of relative indoor humidity at which the
ecobee3 will generate a Low Humidity Alert. The options are:

Off: No alert will be generated.

A humidity range of 5% to 95%.

High Humidity Alert

Sets the percentage of relative indoor humidity at which the
ecobee3 will generate a High Humidity Alert. The options are:

Off: No alert will be generated.

A humidity range of 5% to 95%.

Display Alerts on Thermostat

Select Disable if you do not want any of the alerts to be
displayed on the ecobee3 thermostat screen. Alerts will
continue to be displayed on the web portal and sent via email.

Enable Heating/Cooling Alerts

Select Disable to disable alerts for heat/cool error conditions. If
disabled, alerts indicating that the system failed to heat or cool
will not appear in the screen, web portal, or emails.
19