Miscellaneous - Toshiba Strata CTX Programming Manual

Services
Networking
658/659/660 Network DRL/FRL/QPL Mapping Tables
Prerequisite Program:
These commands are used to establish two mapping tables to equate local DRLs, FRLs and QPLs with
network DRLs, FRLs and QPLs for both outbound and inbound network calls.
F
IELD
Type
Network DRL/FRL/QPL
Local DRL/FRL/QPL

Miscellaneous

The Strata CTX system can monitor SMDR, Call History and Behind Centrex. Use the following programs
to set up these services.
SMDR
The following enable programming for SMDR, Call History and Behind Connection settings.
Programs Used: 512, 513 and 514
The following programs assigns system-wide SMDR parameters.
1. From the Program Menu, click
Services > Miscellaneous >
SMDR.
2. Enter Program 512 data.
3. Enter Program 513 data.
4. Enter Program 514 data.
5. Click Submit.
9-44
None
D
ESCRIPTION
Select the Network DRL/FRL/QPL type.
Possible values: Outbound or Inbound (default = no value)
Outbound – maps a local DRL/FRL/QPL to a Network DRL/FRL/QPL.
•
Inbound – maps a Network DRL/FRL/QPL to a local DRL/FRL/QPL.
•
Enter the Network DRL/FRL/QPL (for outbound) you want to map to a Local
DRL/FRL/QPL.
Possible values: DRL/FRL/QPL1~DRL/FRL/QPL16 (default = 1~16)
Enter the Local DRL/FRL/QPL (for inbound) you want to map to the Network
DRL/FRL/QPL selected in the Network DRL/FRL/QPL field above.
Possible values: 1~16 (default = 1~16)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03