Extending Or Limiting The Adjustment Range - Miele DA 424 V Operating And Installation Instructions

Extending or limiting the adjustment
range
The height range for the appliance can
be extended or limited by moving the
limit switch.
It may be necessary to do this if
– the distance between the cooktop
and the canopy when it is lowered is
less than the minimum safety
disance required. By moving the limit
switch, the height range for the
appliance can be limited (the canopy
will not be lowered as far).
– a greater adjustment range is
required (the canopy will be lowered
further). A maximum appliance
height of 1330 mm is possible.
^ Install the rangehood according to
the installation instructions supplied.
^ Press the Down button to lower the
canopy. The canopy will be lowered
to its fullest extent.
^ Remove the grease filters.
^ Remove the rangehood tower fixing
screw.
,
Ensure that the tower is held
securely while carrying out the
following steps. Danger of inury.
^ Push the tower upwards.
^ Now secure the tower with the screw
you removed earlier.
Installation
25