Operation With Dsm 400 Control Module; Potential Free Connection; Connection To A Light Switch - Miele DA 424 V Operating And Installation Instructions

Operation with DSM 400 control module

The Miele DSM 400 control module can
be used to combine the rangehood with
other components.
It enables the following:

Potential free connection

This is used for controlling another
appliance with the help of the
rangehood's On/Off button s.
The potential free contact of the
DSM 400 a can be installed in an
...EXT model, for instance, which is
connected to a central extraction
system.
The contact can be used to activate a
motorised shut-off flap b which is
installed before the central extraction
system c.
28
The components of the central
extraction system are not supplied as
standard by Miele.
If in any doubt, the advice of a
competent builder must be sought.

Connection to a light switch

The control module can be used to
switch on the rangehood lighting and
also to dim it via a light switch in the
house.
Installation
The control module is fitted in the tower
after the cover plate has been
unscrewed from the ceiling.
All electrical work must be carried
out by a competent, qualified
electrician.