Frequently Asked Questions - Miele KM 3010 Operating And Installation Instructions

Frequently asked questions

,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
Problem
The burner does not
ignite after several
attempts
Gas flame goes out
after ignition
The shape of the gas
flame varies
The burner ignitor is
not working
22
Cause
The burner is not assembled
correctly.
The gas valve is closed.
The burners are wet and soiled
and/or the flame holes in the
burners are soiled and clogged.
The igniters are wet.
The cooktop is not plugged in
and the circuit breaker has
tripped.
- Residue has been built up
between the ignitor and the
burner.
- The burners are assembled
incorrectly.
The burner parts are not
positioned correctly.
The burner head or burner
cover holes are dirty.
The circuit breaker has tripped. Restore power.
There is food residue between
the ignitor and the burner cover.
Solution
Assemble the burner correctly.
Open the gas valve.
Clean and dry the burner.
Dry the igniters.
Plug the cooktop in and restore power.
If lack of power is the problem, the cooktop
can be lit with a match. See "Turning on in the
event of a power failure".
Clean the burners.
Position the burner parts correctly.
Position the burner parts correctly.
Clean the burners.
If lack of power is the problem, the cooktop
can be lit with a match. See "Turning on in the
event of a power failure".
Clean carefully (see "Cleaning and care").