Basic Composition And Required Materials; Manual Input Of Electric Power Consumption - Mitsubishi Electric G-50A Technical Manual

8.3 Basic Composition and Required Materials

8.3.1 Manual input of electric power consumption

This method is only applicable to the charging of electric power consumed by air conditioners.
(1) Basic composition
Charge
Input
license
Uninterrupted
power source (UPS)
(2) Required materials
Table 8-1 shows the materials required to carry out the electric power manual input method.
Name (Model name)
PC for centralized control
PC for apportioning
Integrated software (PAC-TG2000A)
Charge license
Web monitor license
Uninterrupted power sourse (UPS)
1
This software (apportioning support software) is in the install disk of TG-2000A.
44
G-50A
Power supply
unit
PC for centralized control
Install integrated software
Figure 8-7 Basic composition of electric power manual input method
Table 8-1 Materials required for simplified charging
Manufacturer
PC/AT convertible unit
PC/AT convertible unit
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
(referense)
ME remote
controller
ME remote
controller
Confirmed operation of IBM, DELL, Hp Compaq.
For PC spec., refer to Table 6-4.
PC for apportioned calculation of each tenant using CSV file
output from TG-2000A.
Requires the table calculation software (EXCEL).
Requires for each G-50A.
Requires for each G-50A.
FREQUPS A-series.
(Line interactive system)
LOSSNAY
LOSSNAY
Remarks
1