GE D20MX Instruction Manual page 133

APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL
2.5.5. Change the baud rate to match 57600 by selecting the Software
Transmit and Software Receive options and then clicking OK.
2.5.6. Reconnect to and login to the D20MX. See step 2.3 [Connect to the
D20MX device].
2.5.7. Download [sync] the configuration from ConfigPro to the D20MX by
pressing the F7 key.
Result: The Download Configuration File progress bar appears.
2.6. Restart the D20MX device when the download is complete by clicking Boot.
Booting the D20MX resets it to its previous baud rate. If the baud rate in the
D20MX is not the same as that in the communication properties, the command
prompt shows the following characters.
If this is the case, change the ConfigPro communication properties to match
the baud rate of the D20MX.
GE INFORMATION 133