Table of Contents
Advertisement
APPENDIX D: USING CONFIGPRO WITH D20MX
Downloading a D20MX configuration
Local [serial] transfer of configuration
Option 1 - use
ConfigPro terminal
emulator and the F7
key
D20MX INSTRUCTION MANUAL
A D20MX configuration can be downloaded either through a:
•
Local [Serial] Transfer of Configuration, or a
•
Remote [Secure] Transfer of Configuration
The local transfer of configuration can be done by either:
•
"Option 1 - use ConfigPro terminal emulator and the F7 key" on page 131
•
"Option 2 - Use a non-ConfigPro terminal emulator and a "dl" command" on page 134
Serial configuration download to the D20MX is done from within ConfigPro similar to a
D20.
To use a serial connection to download a configuration to the D20MX, using the ConfigPro
terminal emulator and F7 key:
1.
Connect a cable; either a:
–
NULL modem cable (GE Energy part number 977-0529) from the RS-232
connector at the front panel of the D20MX to the serial communication port of the
PC.
OR
–
Wesmaint cable [977-0300] could be used to connect the Wesmaint port at the
back of the D20MX chassis to the serial communication port of the PC.
2.
Set up the terminal emulator with the D20MX communications parameters.
2.1.
From ConfigPro, select Device > Communications > Communications
Options....
Result: The Communications Options window appears.
GE INFORMATION
131
Advertisement
Table of Contents
