Proxy Server Settings; Enable Proxy - Panasonic KX-UDS124 Administrator's Manual

2.3.3 HTTP Authentication
Value Range
Default Value

2.3.2.2 Proxy Server Settings

Enable Proxy

Description
Value Range
Default Value
Proxy Server Address
Description
Value Range
Default Value
Proxy Server Port
Description
Value Range
Default Value
2.3.3 HTTP Authentication
This screen allows you to change the ID and the password used to authenticate the User account.
68 Administrator Guide
Max. 40 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
SIP-CS's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
SIP-CS's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
SIP-CS's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the SIP-CS.
Panasonic_{MODEL}/{fwver} ({mac})
Selects whether to use the proxy server.
•
Yes
•
No
No
Specifies the IP address or FQDN of the proxy server.
Max. 127 characters
Note
•
You cannot leave this field empty if [Enable Proxy] is set to
[Yes].
Not stored.
Specifies the port number of the proxy server.
1–65535
8080
Document Version 2013-03