International Call Prefix
Description
Value Range
Default Value
Country Calling Code
Description
Value Range
Default Value
National Access Code
Description
Value Range
Default Value
Flash/Recall Button
Description
Value Range
Default Value
Flash Hook Event
Description
Value Range
Default Value
Document Version 2013-03
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters
Not stored.
Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Max. 8 characters
Not stored.
When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Max. 8 characters
Not stored.
Selects the function of the FLASH/RECALL button during a
conversation.
•
Terminate
•
Flash Hook
Terminate
Selects the type of signal sent when sending a flash hook event.
•
Signal
•
flashhook
Signal
2.6.1 Call Control - Common
Administrator Guide
113