Samsung SCU-9051 User Manual page 56

setup
Power On Resume and MD Dwell Time
Power On Resume :
This is useful when the power is disconnected and reconnected
due to power failures or other power interruptions.
If the camera was performing a sequence action prior to a
power disconnection, the camera automatically resumes the
action when the power is reconnected.
MD Dwell Time (SCU-2370/VAC/VAC1) :
When Motion Detection under the Preset Edit menu is selected,
MD Dwell Time performs the Group function.
While the camera is performing a sequence action,
if motion is detected from a selected preset location, the camera
pauses the sequence action operation and starts monitoring the
location instead for a duration that is set under the MD Dwell
Time menu.
If the motion is no longer detectable or the duration expires, the
camera aborts the monitoring operation and then resumes the
sequence action.
setup
56_
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
PTZ Trace
Auto Run
Power On Resume
MD Dwell Time
ON
OFF