Interface Symbols - Samsung SCU-9051 User Manual

setup

INTERFACE SYMBOLS

Motion Detection Standby/Operation Display :
When in standby mode, the "
if motion is detected.
Alarm Input Port Status Display :
" 1 ", " 2 " and " " in the upper right of the screen blink.
Current Alarm Port Display According to Input Alarm Ports(Priority) :
Only one of " ", "
The alarm port indicator blinks only when the sequence is set .
Preset Number Display Settings :
*
' ' : If a preset number is already available
'H' : If a preset location is the camera's home position
PTZ Function Screen :
Area Display
Sequence Status
Preset Info
Preset Number Setting Screen :
setup
26_
" in the upper right of the screen blinks and then changes to "
", " " in the upper right of the screen blinks.
ID=001
Area1 Area Name
G-SEQ1
PRESET : 001 Preset Name
P:300 T:040 010X
PTZF Setting
Preset=011* (1~255)
Camera Name
Alarm Input
Motion Detect
123
"