Configuring Scene Assignments; Selecting Setting Items To Be Included As Scene Assignments - Yamaha Aventage RX-A3040 Owner's Manual

Configuring scene assignments

SOURCE
1
Set the unit to the condition (such as input source
and sound program) that you want to assign to a
Input selection keys
scene.
2
Hold down the desired SCENE key until "SET
Complete" appears on the front display.
SCENE
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 SET Complete
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
3
If you want to control the corresponding playback
device after selecting the scene, hold down the
corresponding SCENE key and input selection key
together for more than 3 seconds.
Once the setting is completed successfully, SOURCE blinks twice.
• If you have not registered the remote control code of the playback device yet, see
"Registering the remote control codes for playback devices" (p.149) to register it.
• The SCENE link playback function allows you to start playback of an external
device connected to the unit via HDMI. To enable SCENE link playback, specify
the device type in "Device Control" (p.115) in the "Scene" menu.
SCENE1
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE)
Selecting setting items to be included as
scene assignments
In addition to the default scene assignments (Input, HDMI Output
and Mode), you can also include the following setting items as the
scene assignments in "Detail" (p.115) in the "Scene" menu.
Tone Control, YPAO Volume, Adaptive DRC,
Sound
Extra Bass
CINEMA DSP 3D Mode, Dialogue Lift, Dialogue
Surround
Level, Subwoofer Trim, Extended Surround
Video Video Mode, Video Adjustment
Volume Master Volume
Lipsync Lipsync, Delay
Speaker Setup Setting Pattern, PEQ Select
69
En