Yamaha Aventage RX-A3040 Owner's Manual page 54

1 2 3 4 5 6 7 8 9 10
Cursor keys
ENTER
4
Perform the angle/height measurement.
a Use the cursor keys to select "YES" and press ENTER.
Select "NO" to cancel the angle/height measurement.
b Attach the supplied pole to the center of the microphone base.
Pole
Microphone base
c Place the microphone base at the listening position you will be
seated most frequently and set the YPAO microphone to the
position "1".
• We recommend using a tripod to place the microphone base at ear height.
Use the tripod screws to fix the microphone base in place.
• Do not move the microphone base until the fourth angle measurement
finishes.
d Press ENTER to start the first angle measurement.
The following screen appears on the TV when the first angle
measurement finishes.
e In the same way, perform the angle measurement for the
positions "2" and "3".
f Set the YPAO microphone at the top of the pole and perform the
fourth angle measurement.
The following screen appears on the TV when the fourth angle
Microphone base
measurement finishes.
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO)
54
En