Placing the speakers Set up the speakers in the room by using the following diagram as a reference. For information on speaker systems other than the 9.1-channel system, refer to “Owner’s Manual”. 0.5 to 1 m 0.5 to 1 m (1.6 to 3.3 ft)
( ) to the CENTER terminal. • Use a subwoofer equipped with built-in amplifier. • Remove the power cable of this unit from an AC wall outlet and turn off the subwoofer before connecting the speakers. AUDIO 3 AUDIO 4...
Page 4
Connect the surround back speakers Connect the front presence speakers Connect the subwoofer ( ) to the SUBWOOFER (1) jack. ) to the SURROUND BACK ) to the EXTRA SP1 ( terminals. ) terminals. AUDIO 3 AUDIO 4 MULTI CH INPUT...
OPTICAL BD/DVD player b Connect the TV and this unit with another HDMI cable. c Connect the TV and this unit with a digital optical HDMI HDMI cable or a stereo pin cable. This connection is required to play back TV audio on this unit.
By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker The following screen appears on the TV. connections and distances from the listening position, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room.
Page 7
Now optimization of the speaker settings is complete. • Since the YPAO microphone is sensitive to heat, do not place the microphone in any place where it will be subjected to direct sunlight or high temperatures (top of an AV equipment, etc).