Programming Categories - Samsung SVM 400 User Manual

Telephone system

Hide thumbs Also See for SVM 400:

General description manual (40 pages)

Installation manual (25 pages)

User manual (12 pages)

Table Of Contents

Table of Contents

When programming the SVM 400 there are three types of data, Subscriber Options, SVM 400 Administration

Options, and Phone System Options.

Subscriber Options

These are the options entered by a Subscriber and control the individual behavior of their mailbox.

tions for this can be found in the SVM 400 User Guide.

SVM 400 Administration Options

These are all the programming options for the SVM 400, that are unique to the particular installation.

DS 616 Related Options

This is a collection of DS 616 programming options to make SVM 400 operate correctly. When the SVM 400 is

initialized, much of the set up is completed, but there is still some phone system programming that must be

entered.

Note that if the SVM 400 system is being installed in an existing system (a system that did not previously have

an SVM 400), you will have to use MMC 806 to pre install the system and MMC 724 to assign extension num-

bers to each SVM 400 port. Use any available numbers.

In addition to the MMCs listed below you must set call forwarding to the SVM 400 at every phone that wants to

use voice mail.

The following is a listing of all the DS 616 MMCs that relate to the SVM 400.

MMC 110

MMC 207

MMC 408

MMC 501

MMC 722

MMC 723

MMC 740

MMC 741

MMC 747

MMC 748